SPL Pro-Fi Phonitor xe - red

Phonitor xe is the ultimate stand-alone version for headphone lovers who don't want to compromise. As the first Phonitor ever, the Phonitor xe can be equipped with the new DAC768. This optional internal over DAC enables the Phonitor xe to convert data with superior sound quality. 32Bit word width and PCM sampling rates up to 768kHz, as well as DSD - high up to DSD256 - are the impressive numbers. The analog side of the converter also plays in the highest professional league. The active low-pass filter is realized in 120V voltair technology - just like the Director DAC & preamplifier.

Technical data:

XLR - Input

• Neutrik XLR, balanced, pin 2 = (+)

• Impedance: approx. 20k Ohm

• Common mode rejection: -82 dB

• Max. Input level: +32.5 dB

Cinch - Input

• asymmetric

• Impedance: approx. 10k Ohm

• Max. Input level: +32.5 dB

Digital inputs (optional)

• Coaxial SPDIF (RCA) - sampling rates PCM (kHz): 44.1, 48 , 88.2, 96, 176.4, 192

• Optical TOSLINK (F06) - Sampling rates PCM (kHz): 44.1, 48 , 88.2, 96

• USB (B) - PCM sampling rates (kHz): 44.1, 48 , 88.2, 96, 176.4, 192, 352.8, 384, 705.6, 768

• USB (B) - DSD 1, 2 and 4 (DoP)

• AES - sampling rates PCM (kHz): 44.1, 48 , 88.2, 96, 176.4, 192

Balanced headphone output

• Neutrik 4-pin XLR socket

• Pin assignment: 1 = L (+), 2 = L (-), 3 = R (+), 4 = R (-)

• Impedance: 0.36 Ohm

• Damping factor: 180 at 40 Ohm

• Frequency response: 10 Hz to 300 kHz (-3dB)

• Crosstalk at 1 kHz: -90 dB

• Distortion factor: 0.00082 % (@ 0 dBu, 1 kHz, 100 kOhm load)

• Noise (A-weighted): -98 dB

• Dynamic range: 130.5 dB

Unbalanced headphone output

• 6.35 mm stereo jack socket

• Pin assignment: tip = left, ring = right, shaft = GND

• Impedance: 0.18 Ohm

• Damping factor: 180 at 40 Ohm

• Frequency response: 10 Hz to 300 kHz (-3 dB)

• Crosstalk at 1 kHz: -90 dB

• Distortion factor: 0.00082 % (at 0 dBu, 1 kHz, 100 kOhm load)

• Noise (A-weighted): -103 dB

• Dynamic range: 135.5 dB

Max. Output power (at +30 dBu at 1 kHz)

• 2 x 1 W at 600 Ohm Connection impedance

• 2 x 2 W at 300 Ohm Connection impedance

• 2x 3.7 W at 120 Ohm Connection impedance

• 2x 2.9 W at 47 Ohm Connection impedance

• 2x 2.7 W at 32 Ohm Connection impedance