SPL Phonitor 2 - black

When we launched the Phonitor in 2008, the first 120-volt headphone monitoring amplifier on the market, the professional audio world seemed to have been waiting for it. The success of this unique headphone amplifier was overwhelming, but in retrospect we almost wondered ourselves that no one before us had combined basic listening, speaker simulation and a headphone amplifier. Since then, we have called this new genre headphone monitoring amp, which is what the product name Phonitor is made of. Interestingly enough, the Phonitor not only found its way to many thousands of professional users - it also found an equally large fan community in the hi-fi sector.

Applications:

• The reference - the Phonitor 2 sets new technical and sound standards

• For speakers and headphones - dual-channel 120-volt amplifier for headphones and active speakers or power amplifiers

• Excellent for all dynamic headphones from 10 Ohm upwards

• Connection of balanced headphones possible (from 40 Ohm)

• Remote volume control via motorized potentiometer

• High-resolution laterality control corrects unequal left/right loudness sensation

• Switchable level adjustments (consumer to professional level, 1:1, +6dB, +12 dB)

Technical data:

XLR - Input

• Neutrik XLR, balanced, pin 2 = (+)

• Impedance: approx. 20k Ohm

• Common mode rejection: -82 dB

• Max. Input level: +32.5 dB

Cinch - Input

• asymmetric

• Impedance: approx. 10k Ohm

• Max. Input level: +32.5 dB

headphone output

• 6.35 mm stereo jack socket

• Pin assignment tip = left, ring = right, shaft = GND

• Impedance: 0.18 Ohm

• Damping factor: 180 at 40 Ohm

• Frequency response: 10 Hz to 300 kHz (-3 dB)

• Crosstalk at 1 kHz: -90 dB

• Distortion factor: 0.00091 % (@ 0 dBu, 1 kHz, 100 kOhm load)

• Noise (A-weighted): -103 dB

• Dynamic range: 135.5 dB

Max. output

(at +30 dBu at 1 kHz)

• 2 x 1 W at 600 Ohm Connection impedance

• 2 x 2 W at 300 Ohm Connection impedance

• 2x 3.7 W at 120 Ohm Connection impedance

• 2x 2.9 W at 47 Ohm Connection impedance

• 2x 2.7 W at 32 Ohm Connection impedance

Monitor/Line Outputs

• Neutrik XLR, balanced, pin 2 = (+)

• Frequency response: 4 Hz to 300 kHz ( -3 dB)

• Crosstalk at 1 kHz: -106 dB

• Distortion factor: 0.00085 % (0dBu, 1 kHz, 100 kOhm load)

• Noise (A-weighted): -103.8 dB

• Dynamic range: 136.3 dB

Internal operating voltage

• +/-60 V

power supply

• Mains voltage (switchable): 230 V AC / 50Hz or 115 V AC / 60Hz

• Fuses: 230V = T 630 mA; 115 V = T 1 A

• Power consumption: max 40 VA