Multichannel Audio Processor for Enhanced Monitoring

The D-MON Optimizer from Trinnov Audio stands out compared to the NOVA as a complete multichannel solution for high-end monitoring environments (5.1 up to 9.3.6). The unit comes in a 2U 19" rack format and comes factory-equipped with six (6) Optimizer channels for sound optimization (5.1 or 3x stereo). With optional software licenses, the D-MON can be expanded into a full Immersive Audio/Dolby Atmos optimizer with 9.3.6 capabilities, giving access to all advanced monitoring features on all channels. The D-MON's Bass Management function allows multiple subwoofers to be connected per speaker set. Thanks to EUCON compatibility, the D-MON can be fully integrated into workflows using Avid S3/S4/S6 consoles.

Features

• Enhances monitoring for surround/immersive setups

• Base version with 6 unlocked channels, optionally expandable in 2-channel increments up to 18 output channels

• 6 output channels: 3x stereo or 1x 5.1

• Expandable for Immersive Audio/Dolby Atmos up to 9.3.6 (requires separate software)

• 12 channels at up to 96 kHz; from channel 13 onward, 48 kHz

• Matrix Bass Management allows the use of multiple subwoofers per speaker set

• EUCON compatible with Avid S3/S4/S6

• 2U 19-inch rack format

• Dimensions: 44.4 x 8.9 x 40.5 cm

• Weight: 9.6 kg

Multiple Speaker Sets
The D-MON is a powerful processor when it comes to integrating multiple speaker sets. You can not only optimize up to 18 speakers but also combine them in any configuration. Use your main subwoofer with nearfield monitors, create a 5.1 setup from two speakers, or optimize only your surround speakers – the possibilities are endless.

Perfect for Dolby Atmos & Matrix Bass Management
D-MON meets Dolby's requirements for Atmos. Whether mixing TV or music content, D-MON adapts to any Atmos home speaker configuration. Optimize any system from 5.1.4 up to 9.3.6. D-MON supports and assists with the integration of multiple subwoofers. Manage the bass of any speaker to one or more subwoofers.

Enhanced Monitoring

• Both analog and digital professional inputs and outputs

• Easy integration of MIDI and GPIO up to Avid and EUCON protocols

• Zero-latency switching matrix for routing all signals

• Internal mixer capable of creating various sums from stems

• Trinnov Optimizer for precise tuning of any speaker set

EUCON and AVID Integration
The Trinnov app acts as a gateway between EUCON and Trinnov protocols, allowing you to control all parameters of your processor through your AVID console. Any EUCON-enabled product is compatible. D-MON provides full EUCON compatibility and seamless integration with AVID control surfaces: S6, S5, S3, Dock, as well as Icon D-Command & D-Control.


Analog Interfaces

• 8x IN: Balanced (DB25)

• 16x OUT: Balanced (DB25)

• 8x OUT: Balanced (XLR)

• 1x Headphone output: Unbalanced

Digital Interfaces

• 16x AES OUT (DB25): Tascam format

• 24x IN / 8x OUT: Ravenna/AES67 - AoIP does not support speaker outputs

• Dante compatible at 48 kHz

• 1x Word Clock I/O via BNC

• 1x MIDI I/O

Audio Processing

• Per channel: 31-band EQ, FIR EQ, Gain, Polarity, and Delay

Technical Specifications

• ADC Resolution / Sampling Rate: 24-bit / 96 kHz

• DAC Resolution / Sampling Rate: 24-bit / 96 kHz

• A/D Signal-to-Noise Ratio: 119 dB (A-weighted)

• D/A Signal-to-Noise Ratio: 118 dB (A-weighted)

• Processing: 64-bit floating point up to 96 kHz sampling rate

• Clock / Jitter: > 50 dB above 100 Hz