The Phonitor x is the ultimate headphone amplifier. Thanks to VOLTAiR technology, it can power balanced or unbalanced headphones up to 3.7W. The Phonitor matrix is the most advanced crossfeed circuit on the market. The Phonitor x is also an excellent preamplifier that can be used to drive power amplifiers and loudspeakers directly. The Phonitor is a success story. Invented and developed to give sound engineers and producers a tool to mix music on headphones. But also in the Hi-Fi world the Phonitor found a big fan community.

Technical data:

XLR - Input

• Neutrik XLR, balanced, pin 2 = (+)

• Impedance: approx. 20k Ohm

• Common mode rejection: -82 dB

• Max. Input level: +32.5 dB

Cinch - Input

• asymmetric

• Impedance: approx. 10k Ohm

• Max. Input level: +32.5 dB

Digital inputs (optional)

• Coaxial SPDIF (RCA)

• Optical TOSLINK (F06)

• USB (B)

• Sampling rates (kHz): 44.1, 48 , 88.2, 96, 176.4, 192

Balanced headphone output

• Neutrik 4-pin XLR socket

• Pin assignment: 1 = L (+), 2 = L (-), 3 = R (+), 4 = R (-)

• Impedance: 0.36 Ohm

• Damping factor: 180 at 40 Ohm

• Frequency response: 10 Hz to 300 kHz (-3dB)

• Crosstalk at 1 kHz: -90 dB

• Distortion factor: 0.00091 % (@ 0 dBu, 1 kHz, 100 kOhm load)

• Noise (A-weighted): -98 dB

• Dynamic range: 130.5 dB

Unbalanced headphone output

• 6.35 mm stereo jack socket

• Pin assignment: tip = left, ring = right, shaft = GND

• Impedance: 0.18 Ohm

• Damping factor: 180 at 40 Ohm

• Frequency response: 10 Hz to 300 kHz (-3 dB)

• Crosstalk at 1 kHz: -90 dB

• Distortion factor: 0.00091 % (at 0 dBu, 1 kHz, 100 kOhm load)

• Noise (A-weighted): -103 dB

• Dynamic range: 135.5 dB

Max. Output power (at +30 dBu at 1 kHz)

• 2 x 1 W at 600 Ohm Connection impedance

• 2 x 2 W at 300 Ohm Connection impedance

• 2x 3.7 W at 120 Ohm Connection impedance

• 2x 2.9 W at 47 Ohm Connection impedance

• 2x 2.7 W at 32 Ohm Connection impedance

line outputs

• Neutrik XLR, balanced, pin 2 = (+)

• Cinch, unbalanced

• Frequency response: 4 Hz to 300 kHz ( -3 dB)

• Crosstalk at 1 kHz: -106 dB

• Distortion factor: 0.00085 % (0 dBu, 1 kHz, 100 kOhm load)

• Noise (A-weighted): -103.8 dB

• Dynamic range: 136.3 dB